Q3 TFSI e > Q3 > Audi Malta
  • stage_exterior_front.jpg
Öffentliche Ladesituation Audi Q3 TFSI e

Q3 45 TFSI e

Electrifying all-rounder.
The Audi Q3 45 TFSI e.

Fuel consumption combined¹: 1.7–1.4 l/100 km
Power consumption combined¹: 16.0–14.4 kWh/100 km
CO₂ emissions combined¹: 39–32 g/km

Electrifying family SUV. The Audi Q3 45 TFSI e². With an innovative plug-in hybrid drive that covers some 45 to 51 kilometres³ in all-electric mode while producing zero local emissions. Also featuring plenty of space, technical refinements and more sophisticated suspension for enhanced dynamics.

Combining strengths

Experience the dynamic combination of an electric drive and a combustion engine. The Audi Q3 45 TFSI e² offers you a combined system power of 180 kW (Fuel consumption combined¹: 1.7–1.4 l/100 km; Power consumption combined¹: 16.0–14.4 kWh/100 km; CO₂ emissions combined¹: 39–32 g/km) as well as 400 Nm of system torque. Thanks to the boost function⁴, the vehicle accelerates from 0 to 100 km/h in 7.3 seconds.

Woman at the wheel of the Audi Q3 TFSI e
 

Electrifying short trips

With a fully charged battery, you can draw on a peak electrical output of 85 kW (Fuel consumption combined¹: 1.7–1.4 l/100 km; Power consumption combined¹: 16.0–14.4 kWh/100 km; CO₂ emissions combined¹: 39–32 g/km) as well as electrical torque of 330 Nm. All-electric range is approximately 45 to 51 km³ and the electric top speed is up to 140 km/h.

Customised driving experience

The MMI lets you choose from various driving modes: complete everyday short trips in all-electric mode (EV), or use the combustion engine as the primary power source to conserve battery charge for a future electric drive (Hold) or increase it (Charge)⁵.

MMI system Audi Q3 TFSI e
 
The Audi Q3 45 TFSI e² in numbers

Electric range circa

45–51

km*

Acceleration

7.3

s**

0 to 100 km/h

System output

180

kW**

*Electric range combined according to WLTP, for 17- to 20-inch wheels.
**Fuel consumption combined¹: 1.7–1.4 l/100 km; Power consumption combined¹: 16.0–14.4 kWh/100 km; CO₂ emissions combined¹: 39–32 g/km.

Audi virtual cockpit Audi Q3 TFSI e

Everything at a glance

In addition to many familiar functions and views, the high-resolution MMI display and the Audi virtual cockpit provide you with an overview of the vehicle’s remaining range and energy flow. The power meter in the Audi virtual cockpit offers information on electric performance, the battery’s state of charge and brake recuperation.

Home charging situation Audi Q3 TFSI e

Home charging made simple

With the standard e-tron charging system compact, you can charge your Audi Q3 45 TFSI e² at home at domestic or industrial power sockets at a charging capacity of up to 3.6 kW⁶.

Learn more

Colors and wheels

Combine different paint finishes and wheels with one another to create an Audi Q3 45 TFSI e² entirely according to your ideas.
2Y2Y-42F_Pyramid_AU32x_Q3_001_03.jpg
Glacier White Metallic Glacier White Metallic
Chronos Grey Metallic Chronos Grey Metallic
Navarra Blue Metallic Navarra Blue Metallic
Turbo blue Turbo blue
Tango red metallic Tango red metallic
20" light-alloy wheels, 5-twin-spoke red- or, matt black, high-gloss finish 20" light-alloy wheels, 5-twin-spoke red- or, matt black, high-gloss finish
19" alloy wheels, 5-arm dynamic 19" alloy wheels, 5-arm dynamic
19" light-alloy wheels, 5-arm, titanium grey matt, glossy finish 19" light-alloy wheels, 5-arm, titanium grey matt, glossy finish
19" alloy wheels, 7-spoke rotor, anthracite black, glossy finish 19" alloy wheels, 7-spoke rotor, anthracite black, glossy finish
Configure now
View boot Audi Q3 TFSI e

Flexible space concept

The battery for the electric motor is located below the flat loading area to save space. This allows for 380 litres of luggage capacity, or even up to 1,375 litres when the seats are folded down. The rear seat bench plus as standard offers you even more flexibility. Its fore/aft position and the angle of the backrests are adjustable, and the seats can be folded down (ratio 40 : 20 : 40).

Note: Experience the generous storage space of the Audi Q3 45 TFSI e² with this rear seat animation.

Room for sportiness

Interior design selection and interior S line – two fascinating options for the interior. The interior design selection adds Alcantara⁷ sections on the instrument panel and door armrests.

View Cockpit Audi Q3 TFSI e
 
 

The interior S line features S embossing on the front seat backrests and the S emblem on the sport leather steering wheel. Inlays in dark aluminium and door sill trims with illuminated aluminium inlays at the front emphasise the sporty look.

Take a look around the interior
 

Amazon Alexa and Amazon Music

By integrating Amazon Alexa⁸ or Amazon Music into your Audi, you can now use your favourite Amazon voice or music service even when on the road. Really easily and without a smartphone or app. Listen to the news, call up the latest weather forecast or sporting results, stream music and a whole lot more.

Learn more

Harness a new drive

Dynamic lines and excitingly styled surfaces help the Audi Q3 45 TFSI e² stand out from the crowd. The striking front and the optional matrix LED headlights with dynamic indicators create an attractive and unmistakeable look. Let the S line equipment line emphasise your sporty side all along the line. Dynamic design elements such as the S line bumpers draw immediate attention to the vehicle’s powerful performance.

Side rear view Audi Q3 TFSI e

Panoramic view

Note: Experience the Audi Q3 45 TFSI e² from different angles in this 360-degree animation.

Audi Q3 TFSI e
1
*** Add your local disclaimer for consumption and emission values ***
2
Fuel consumption combined¹: 1.7–1.4 l/100 km; Power consumption combined¹: 16.0–14.4 kWh/100 km; CO₂ emissions combined¹: 39–32 g/km.
3
Electric range combined according to WLTP, for 17- to 20-inch wheels.
4
When the accelerator pedal is fully depressed, the electric motor is activated for a brief period (boost function). The availability and repetition of this function depend on various factors, for instance the battery’s state of charge and the temperature of the drive components.
5
Can lead to increased fuel consumption.
6
The main connecting cable with industrial connector and the operating unit of the charging system are matched to each other. If you subsequently change the mains connecting cable to a different connector type, the available charging capacity of the overall system may be reduced. The standard e-tron charging system compact has a vehicle connecting cable measuring 4.5 m in length. Charging capacity depends on the supplied connector and market-specific mains power characteristics and may be up to 3.6 kW. Charging capacity depends on the type of mains connector used, the country’s voltage and the number of available phases of the power network as well as the customer’s own domestic installation. It may therefore be lower in some cases.
7
Alcantara is a microfibre non-woven material.
8
Amazon, Amazon Music, Alexa and all associated logos are brands or registered trademarks of Amazon.com, Inc. or affiliated companies. Amazon Alexa integration is available in the following languages: German, Spanish, Italian, French, English and Japanese. The system language of the MMI navigation plus with MMI touch must be set to a language supported by Amazon Alexa integration. Please contact your Audi partner for further information on availability. Audio streaming via Alexa requires a paid data plan from an Audi partner. Use of Amazon Music can lead to additional costs.
Back to top

© 2021 AUDI AG. All Rights Reserved.

The specified fuel consumption and emission data have been determind according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.




We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).
VHost
www.audi.com.mt
Version
204.1.0
Build
20241112062434
Frontend
170.0.0
Rendertime
20241121100357
StaticVersion
20410
Activated Scopes
Context Scopes